-
-
-
Solutions
-
-
language
Delve deeply and work diligently to achieve new heights
All colleagues unite and focus their efforts to write a new chapter of developmentWhat is power adapter ripple? How can ripple generation be controlled?
所属分类： Industry News
发布时间：2020-06-24
First, let’s explain what ripple actually is.
Power adapter Why does ripple occur?
The ripple in a power adapter can indeed be observed using appropriate equipment—namely, an oscilloscope. On the oscilloscope, you can see that when the power adapter is operating, the voltage exhibits slight fluctuations, somewhat resembling ripples on water; hence, this phenomenon is referred to as “ripple.” So, does the presence of ripple in a power adapter indicate something positive or negative?
In fact, even the best power adapters exhibit some level of ripple—some more, some less. Generally speaking, the higher the output voltage, the greater the ripple. Ripple is simply an AC component superimposed on a DC voltage; when filtering is insufficient, this AC component remains, resulting in observable ripple.
In general, for 5V products, the power‑supply ripple is typically kept below 100 mV, while for 12V products, the maximum ripple is usually around 120 mV. So how can we control the generation of ripple in a power adapter?
First, we can increase the inductance and the output capacitance for filtering. Simply put, the current ripple across an inductor is inversely proportional to its inductance value, while the power‑adapter ripple is inversely proportional to the output capacitor’s capacitance. Therefore, by increasing both the inductance and the capacitance, we can reduce the power‑adapter ripple.
Secondly, we can connect a capacitor C or an RC network in parallel with the diode. The primary purpose of this is to suppress high-frequency oscillations; however, the component values must be determined through repeated experimentation, as inappropriate choices may反而 lead to adverse effects. Therefore, this approach should be adopted with great care.
Third, using an LDO filter—this approach is the most effective, but it also incurs the highest cost and results in relatively high power consumption.
Fourth, add a first-order LC filter; the LC filter provides excellent suppression of ripple in the power adapter.