



36W power adapter manufacturers take you to understand: power adapter production process
Introduction :The 36W power adapter manufacturer tells you that the power adapter is always visible around us, and it is also a must-have item in our lives, so don’t you know the production process of the power adapter? The following 36W power adapter manufacturers will take everyone to briefly understand the production process of the power adapter.
36W power adapter manufacturers take you to understand: power adapter production process
Introduction :The 36W power adapter manufacturer tells you that the power adapter is always visible around us, and it is also a must-have item in our lives, so don’t you know the production process of the power adapter? The following 36W power adapter manufacturers will take everyone to briefly understand the production process of the power adapter.
- Categories:36W power adapter
- Author:
- Origin:
- Time of issue:2021-05-21
- Views:0
The 36W power adapter manufacturer tells you that the power adapter is always visible around us, and it is also a must-have item in our lives, so don’t you know the production process of the power adapter? The following 36W power adapter manufacturers will take everyone to briefly understand the production process of the power adapter.
Analysis of the production process of the power adapter:
1. The 36W power adapter manufacturer tells you that the product uses polycarbonate (PC) material, and the shrinkage rate is 0.5%~0.8%;
2. The 36W power adapter manufacturer tells you the shell molding process-injection molding is also called injection molding. Injection molding is a method of using an injection molding machine (or injection machine) to inject thermoplastic melt into a mold under high pressure, and then cool and solidify to obtain a product. Injection molding can also be used for the molding of thermoset plastics and foam plastics. The 36W power adapter manufacturer tells you that the advantages of injection molding are fast production speed, high efficiency, automatic operation, and the ability to form parts with complex shapes, which is especially suitable for mass production. The disadvantage is that the cost of equipment and molds is high, and it is difficult to clean the injection molding machine.
3. The 36W power adapter manufacturer tells you that the surface finish requirements of the product are relatively high, and the fluidity of the PC is poor. Therefore, the process usually uses high mold temperature and high material temperature to fill, so in order to improve the molding efficiency, point gates are used, and the injection molding is graded. Injection molding.
CONTACT
Address:
Block A, Dakan Science &Technology Park, Dakan 2nd Village, Xili Town, Nanshan District, Shenzhen City, Guangdong Province, China
Contact: Claire Luo
Email :
Tel: 0755-36382933 Ext:621
Copyright © 2020 Shenzhen SOY Technology Co., Ltd. 粤ICP备11040432号 Powered by www.300.cn SEO