Switching power supply 24V manufacturers tell you that switching mode power supply, also known as switching power supply and switching converter, is a high-frequency power conversion device and a type of power supply. Its function is to convert a level of voltage into the voltage or current required by the user through different forms of architecture. Switching power supply 24V manufacturers tell you that the input of the switching power supply is mostly AC power (such as commercial power) or DC power, and the output is mostly equipment that requires DC power, such as personal computers, and the switching power supply is between the two. conversion of current.

Advantages of Switching power supply 24V:
Switching power supply 24V manufacturers tell you that switching power supply is different from linear power supply. Most of the switching crystals used in switching power supply are switched between fully open mode (saturation region) and fully closed mode (cut-off region), both of which have low power consumption. Due to the characteristics of heat dissipation, the conversion between switching will have higher dissipation, but the time is very short, so it saves energy and generates less waste heat. Ideally, the switching power supply itself does not consume power. Voltage regulation is achieved by adjusting the turn-on and turn-off times of the transistors. On the contrary, in the process of generating the output voltage of the linear power supply, the power crystal works in the amplification area, and it also consumes electric energy. Switching power supply 24V manufacturers tell you that the high conversion efficiency of the switching power supply is one of its major advantages, and because the switching power supply operates at a high frequency, a small size and light weight transformer can be used, so the switching power supply will also be smaller than the size of the linear power supply. The weight will also be lighter. If the high efficiency, volume and weight of the power supply are the key considerations, the switching power supply is better than the linear power supply. Switching power supply 24V manufacturers tell you that the switching power supply is more complicated, and the internal transistors will switch frequently. If the switching current is not processed, noise and electromagnetic interference may be generated and affect other equipment. Moreover, if the switching power supply is not specially designed, its power factor may be not tall.