Notice from power supply manufacturers when you use the inverter

1. The DC voltage must be consistent.
There is a DC voltage value for each inverter, such as 12V, 24V, etc.
It is required that the battery voltage selected must be consistent with the DC input voltage of the inverter. For example, we should choose the 12V battery to match with a 12V inverter.

2. The output power of the inverter must be greater than the power used by the electrical appliances, especially for electrical appliances with high power at startup, such as refrigerators and air conditioners, with a larger margin.
3. The positive and negative poles must be connected correctly.
The DC voltage be connected to the inverter is marked with positive and negative poles. Red is positive (+), black is negative (-), the battery is also marked with positive and negative as same as the inverter. They should be connected to positive (red to red), negative connect negative (black connect black). The diameter of the connecting wire must be thick enough and the length of the connecting wire must be reduced as much as possible.
4. It should be placed in a ventilated and dry place, beware of rain, and be more than 20cm away from surrounding objects, away from flammable and explosive materials, and do not place or cover other objects on the machine. The use environment temperature is not more than 40℃ .
5. Charging and inverter cannot be performed at the same time. That is, do not insert the charging plug into the electrical circuit of the inverter output during inverter.
6. The interval between two startups is not less than 5 seconds (cut off the input power).
7. Please wipe with a dry cloth or anti-static cloth to keep the machine tidy.
8. Before connecting the input and output of the machine, please ground the shell of the machine correctly.
9. Users should be strictly prohibited to open the case for operation and use to avoid accidents.
10. When you suspect that the machine is malfunctioning, please do not continue to operate and use it.
The input and output should be cut off in time, and inspected and repaired by qualified maintenance personnel or maintenance organizations.
11. When connecting the battery, make sure that there are no other metal objects on your hands to avoid short circuit of the battery and burn the human body.

12. The use environment, based on safety and performance considerations, the installation environment should have the following conditions:
1) Dry: Do not soak in water or rain;
2) Shady and cool: the temperature is between 0℃ and 40℃;
3) Ventilation: Keep no foreign matter within 5cm on the shell, and other end surfaces are well ventilated.
13. Installation method
1) Place the converter switch in the OFF position, and then insert the cigar head into the cigarette lighter socket in the car to ensure that it is inserted in place and in good contact;
2) Make sure that the power of all electrical appliances is below the nominal power of G-ICE. Plug the 220V plug of the electrical appliance directly into the 220V socket at one end of the converter, and ensure that the sum of the power of all connected appliances in the two sockets is in G-ICE Within the nominal power;
3) Turn on the converter switch, the green indicator light is on, indicating that it is working normally;
4) The red indicator light is on, indicating that the converter shuts down due to overvoltage/undervoltage/overload/overtemperature;
5) In many cases, due to the limited output of the car cigarette lighter socket, the converter alarms or shuts down during normal use. At this time, just start the car or reduce the electric power to return to normal.