Delve deeply and work diligently to achieve new heights

Delve deeply and work diligently to achieve new heights

All colleagues unite and focus their efforts to write a new chapter of development

Portable Outdoor Energy Storage Power Supply: 2200W Bidirectional Inverter Power Board

发布时间:2022-09-13

SOY-LT2200W-54V is for digitalization. Bidirectional inverter power supply , The main features of the product are: 
1. Integrates an inverter and a charger into a single unit. 
2. High efficiency, high quality; 
3. Built-in EMI filter, low ripple noise; 
4. Equipped with overcurrent protection, overvoltage protection, overheating protection, short-circuit protection, and more. 
5. The power supply is equipped with communication capabilities, enabling real-time transmission of internal voltage, current, temperature, power, and other parameters, as well as fault information.

 2200W bidirectional inverter power board

Inverter Mode DC Input Specifications

Serial numberParameter DescriptionMinimum value (Vac)Rated Value (Vac)Maximum value (Vac)Note
1.1Enter battery voltage394854.6 
1.2Input Overvoltage Protection56.757.357.8 
1.3Input Overvoltage Recovery55.155.656.2 
1.4Input Undervoltage Protection32.53333.5A voltage drop below the protection threshold sustained for 2 seconds is classified as undervoltage.
1.5Input Undervoltage Recovery34.134.635.2 
1.6No-load power consumption (W)  20Input rated voltage
1.7Shutdown standby current (µA)  100 

Inverter Output Specifications (DC/AC, 2.2 kW)

Serial numberParameter DescriptionMinimum valueRated valueMaximum valueNote
2.1Output Voltage (Vac)95/114100/120105/126The output voltage waveform is a sine wave.
2.2Output Frequency (Hz)49/5950/6051/61 
2.3Output Efficiency (%)

91

  1.39–54.6 V input voltage, rated output power, average efficiency under resistive load 
2. Rated input voltage, average efficiency at 50%, 65%, 80%, and 100% resistive load conditions
2.4Output Power (W) 2200  
2.5Output Overpower Protection 1 (W)2201 2640After 60 seconds, the protection locks; output can be restored via the host communication protocol (error < 30 W).
2.6Output Overpower Protection 2 (W)2641 30803080 After 30 seconds, the protection locks; output can be restored via the host communication protocol (error < 30 W).
2.7Overpower protection output 3 (W)3081 3740After 2 seconds, the protection locks; output can be restored via the host communication protocol (with an error margin of less than 30 W).
2.8Overpower protection output 4 (W)3741 4400After 200 ms, the protection locks; output can be restored via the host communication protocol (with an error margin of less than 30 W).
2.9Output short-circuit protection   Short-circuit protection is latched; output can be restored via the host communication protocol.
2.10Over-temperature protection (°C)   After internal over-temperature protection is triggered, the status is reported to the monitoring system; once the temperature has dropped, output is restored via the protocol.
2.11Total Harmonic Distortion THD1 (%)  348 Vdc input, with a rated resistive load
2.12Total Harmonic Distortion THD2 (%)  639 Vdc input, with a rated resistive load
2.13Inductive & Capacitive Loads (VA) 2200 It is not sustainable to operate under load for extended periods.
2.14Dynamic Voltage Transient Range (%)-5 5 
2.15Voltage transient recovery time (ms)  600%-100%-0% load
2.16DC component (mV)-100 100 
2.17Mixed workload   1. Must simultaneously handle a 220 W resistive load and a 1650 VA capacitive load. 
2. Must simultaneously accommodate a 220 W resistive load and a 1650 VA inductive load.
2.18Bypass function   Priority bypass function ensures that the AC input current does not exceed 15 A during operation.

Charging Status AC Input Specifications

Serial numberParameter DescriptionMinimum valueRated valueMaximum valueNote
3.1Input Voltage (Vac)90100/120140 
3.2Input Undervoltage Protection808590 
3.3Input Overvoltage Protection141145150 
3.4Input Frequency (Hz)45/5550/6055/65 
3.5Input Current (A)  15 
3.6Power factor0.98  Rated input voltage, when the output load is in the 50%–100% range
3.7THD  5%Rated input voltage, full-load output
3.8Impulse current (A)  20 

Charging Status DC Output Specifications (AC/DC, 1600W)

Serial numberParameter DescriptionMinimum valueRated valueMaximum valueNote
4.1Output Voltage Range (Vdc)39 54.6 
4.2Output Current (A)  41Constant power output
4.3Trickle Charging (A)456Trickle charging below 39V
4.4Output Efficiency (%)91  Rated input, resistive load: average output values at 50%, 65%, 80%, and 100% load.
4.5Output voltage ripple  3%During testing, the oscilloscope is required to have a bandwidth limit of 20 MHz and a horizontal sweep speed of 0.01 s/div.
4.6Output current ripple  5%Actual current testing of the battery
4.7Voltage regulation accuracy  2%The voltage regulation accuracy shall be no greater than 2% (over the range of 0% to 100% of the rated output current).
4.8Steady-flow accuracy  3%The current regulation accuracy shall be no greater than 3% (over the range of 20% to 100% of the rated output current).
4.9Output Current Limit Adjustment Range (A)0 41 
4.10Over-temperature protection (°C)   It can self‑recover when the temperature drops—system determines whether to power on.
4.11Output short-circuit protection   Short-circuit protection is latched; output can be restored via the host communication protocol.

Communication protocol

AC-RX, AC-TX serial communication; serial communication (uploading voltage, current, temperature, frequency, and charge/discharge status—details are provided in the communication protocol). 
For measurements below 200 W, the measurement accuracy is better than 5 W; for values above 200 W, the measurement accuracy is better than 3%, with a temperature error of less than 3°C and a voltage accuracy of ±5%.

As one of the leading power‑supply manufacturers, Shenzhen Suoyuan Technology Co., Ltd. is introducing a new line of outdoor portable power solutions ranging from 100 W to 3,000 W.